Hello everyone,
My bare metal server is often under attack and trig OVH mitigation.
To limit overload, I have configured and activated the OVH "Edge Network Firewall".
The amount of dropped packet from my soft Firewall decrease but I still receive few unwanted packets.
example: TCP:80 or TCP:22 from 113.185.21.37 (VietNam Post and Telecom Corporation)
Does somebody has an idear?
thanks by advance
Here is my "Edge Network Firewall" config:
"Edge Network Firewall": activated
rules:
prio=0 action=accept protocol=TCP ESTABLISH=true
prio=1 action=accept protocol=ipv4 source_ip=<__myIP__>
prio=19 action=deny protocol=ipv4 source_ip=all
mitagation: activation=permanent.
Edge Network Firewall: packet not dropped
Related questions
- Blacklisted IP ranges by UCEPROTECTL3
35947 
23.02.2021 09:08
- Hot to delete my account?
34848 29.07.2018 19:49
- Free easy to setup OpenWRT NAT firewall for OVH (c)ESXi dedicated hosts
28989 16.05.2022 07:18
- Proxmox + opnsense
28920 19.07.2018 15:53
- Upcoming change: EFI System Partition over RAID1 for Linux installations
28683 08.10.2025 16:29
- Network Resilience Improvement for LACP aggregation on OVHcloud Bare Metal Servers
27016 27.10.2025 11:21
- .iso install on IPMI very slow
26291 22.05.2018 11:14
- Purchased a dedicated server - Awaiting Validation on a Saturday
26220 19.05.2018 20:07
- KVM error, blank screen, not send Keys
26014 11.12.2021 11:45
- Can't cancel/return server
24364 25.06.2018 08:31
Hello,
I have the same issue with my Esxi.
I'm trying to allow only my public ip to connect, but without success.
3 Autoriser TCP MY IP 443 Actif
4 Autoriser TCP MY IP 443 Actif
5 Refuser TCP tous 443 established Actif
8 Refuser TCP tous 443
If someone get an idea.
Thank you.