Bonjour. J'ai un dédié RISE 1-2.
Intel Xeon-E 2136 - 6c/12t - 3.3 GHz/4.5 GHz
64 Go ECC 2666 MHz
2×500 Go SSD NVMe
J'en étais très content. Rapide, etc.
Proxmox tournait super bien.
Ensuite, problème RAID
NVMe 0 : WDC : mort (même plus visible)
NVMe 1 : WDC : ok
Le serveur tourne, après redémarrage des conteneurs.
J'ouvre un incident OVH. Lundi soir OVH remplace le NVMe par un nouveau Samsung, + màj BIOS MB Asus
Plutôt que de reconstruire le RAID, je réinstall Proxmox 8
J'ai tous les backups fait juste 2h avant l'intervention.
Je restore les backups : ok
2 ou 3 H après, j'ai un Load cpu à 80.
Plein d' IO Wait.
Je trouve le conteneur responsable (mails, Clamd). Je n'avais jamais eu ce problème.
Je fais un stop / start du conteneur, et ça s'arrange.
Mais, globalement, le serveur est LENT.
Les sites web répondent moins vite.
J'avais commencé à passer d' Apache vers Nginx, configuré en HTTP/3.
Le site en H3 était vraiment rapide !
Depuis le remplacement du NVMe, ce n'est plus le cas.
Les sites fonctionnent, mais on sent une différence.
Le RAID est ok.
Pas vu d'erreurs avec smartctl -a
Vous avez déjà eu ça ?
Comment je peux mieux tester les SSD NVMe ? ... sans devoir mettre mon serveur down ?
OVH peut-il aider sur ce problème ?
La différence de perf disque est sensible depuis le remplacement du NVMe en panne.
Le serveur tourne maintenant en RAID soft avec
- nvme0n1 : WDC CL SN720 SDAQNTW-512G-2000 (ancien disque)
- nvme1n1 : SAMSUNG MZVL2512HCJQ-00B07
==========================================================================
# smartctl -a /dev/nvme0n1
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-10-pve] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: WDC CL SN720 SDAQNTW-512G-2000
Serial Number: 205156802612
Firmware Version: 10109122
PCI Vendor/Subsystem ID: 0x15b7
IEEE OUI Identifier: 0x001b44
Total NVM Capacity: 512,110,190,592 [512 GB]
Unallocated NVM Capacity: 0
Controller ID: 8215
NVMe Version: 1.3
Number of Namespaces: 1
Namespace 1 Size/Capacity: 512,110,190,592 [512 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 001b44 8b484336fb
Local Time is: Fri May 16 13:28:48 2025 CEST
Firmware Updates (0x14): 2 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Log Page Attributes (0x02): Cmd_Eff_Lg
Maximum Data Transfer Size: 128 Pages
Warning Comp. Temp. Threshold: 80 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Namespace 1 Features (0x02): NA_Fields
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 5.50W - - 0 0 0 0 0 0
1 + 3.50W - - 1 1 1 1 0 0
2 + 3.00W - - 2 2 2 2 0 0
3 - 0.0700W - - 3 3 3 3 4000 10000
4 - 0.0025W - - 4 4 4 4 4000 45000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 2
1 - 4096 0 1
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 37 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 26%
Data Units Read: 380,355,746 [194 TB]
Data Units Written: 186,292,308 [95.3 TB]
Host Read Commands: 7,409,430,588
Host Write Commands: 6,827,945,587
Controller Busy Time: 16,441
Power Cycles: 55
Power On Hours: 36,050
Unsafe Shutdowns: 45
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Error Information (NVMe Log 0x01, 16 of 256 entries)
No Errors Logged
======================================================
# smartctl -a /dev/nvme1n1
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-10-pve] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: SAMSUNG MZVL2512HCJQ-00B07
Serial Number: S63CNX0Y413813
Firmware Version: GXA7802Q
PCI Vendor/Subsystem ID: 0x144d
IEEE OUI Identifier: 0x002538
Total NVM Capacity: 512,110,190,592 [512 GB]
Unallocated NVM Capacity: 0
Controller ID: 6
NVMe Version: 1.3
Number of Namespaces: 1
Namespace 1 Size/Capacity: 512,110,190,592 [512 GB]
Namespace 1 Utilization: 331,908,407,296 [331 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 002538 b451b43ba0
Local Time is: Fri May 16 13:29:22 2025 CEST
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp
Log Page Attributes (0x0e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size: 128 Pages
Warning Comp. Temp. Threshold: 81 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 8.37W - - 0 0 0 0 0 0
1 + 8.37W - - 1 1 1 1 0 200
2 + 8.37W - - 2 2 2 2 0 200
3 - 0.0500W - - 3 3 3 3 2000 1200
4 - 0.0050W - - 4 4 4 4 500 9500
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 33 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 13,224,313 [6.77 TB]
Data Units Written: 1,615,881 [827 GB]
Host Read Commands: 212,653,266
Host Write Commands: 55,212,716
Controller Busy Time: 714
Power Cycles: 13
Power On Hours: 53
Unsafe Shutdowns: 10
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 33 Celsius
Temperature Sensor 2: 37 Celsius
Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged
Merci
Bon après-midi. Didier
