Hello,
After doing "ip address show" I get the following on the active network interface: eno0 (hiding IPs on purpose):
> 2: eno0: mtu 1500 qdisc fq_codel state UP group default qlen 1000
> link/ether *****************
> inet ********** brd ********** scope global dynamic eno0
> valid_lft 85117sec preferred_lft 85117sec
> inet6 ********** scope link
> valid_lft forever preferred_lft forever
How do I enable IPv6 on my server (keep in mind I will still want to be able to SSH to the server from my IPv4 address at home) ?
Thanks in advance.
What I do is, first, set a live ipv6:
```lang=bash
sudo ip -6 addr add 2001:/128 dev ens3
sudo ip -6 route add 2001:::1 dev ens3
sudo ip -6 route add default via 2001:::1 dev ens3
```
If it works, then set it on the configuration. On Debian:
```lang=bash
sudo vim /etc/network/interfaces.d/60-ipv6
```
iface ens3 inet6 static
address 2001:
netmask 128
scope global
gateway 2001:****::1
Yeah, ty for the reply. That's what I ended up doing for IPv6 to be enabled.